Mechanical, electrical & life safety
The equipment a building cannot run without, inspected against code and the maintenance schedule.
- Mechanical system inspectionsIndependent inspections of heating, cooling, ventilation and plumbing systems, with a clear report on condition, risks and priorities for repair.
- Electrical system inspectionsIndependent condition inspections of service equipment, switchgear, panels, wiring, grounding and emergency power, with a ranked list of findings.
- Air and water filtration system inspectionsInspections of HVAC air filtration, cooling towers, water treatment and backflow devices, with practical findings on condition, maintenance and risk.
- Compressed air system inspectionsInspections of compressors, receivers, dryers and distribution piping that find leaks, waste and safety hazards and rank what to fix first.
- Diesel generator inspectionsIndependent inspections of diesel standby generators, fuel systems and transfer switches, so you know your backup power will start and carry the load.
- Elevator and escalator inspectionsIndependent condition assessments of elevators and escalators that help owners prepare for mandated inspections, manage contractors and plan upgrades.
- Crane inspectionsIndependent condition inspections of overhead cranes, hoists and rigging, plus help organizing the frequent and periodic inspections your program needs.
- Ladder and scaffolding inspectionsInspections of portable ladders, fixed ladders and scaffolds, plus practical help building the inspection routines that keep them safe to use.
- Fire inspections, verification and monitoringIndependent fire protection inspections and coordination of fire alarm verification, monitoring and the annual testing your building is required to have.
- Fire investigationsEngineering assessments after a fire of the building systems involved, damage to mechanical and electrical equipment, and what it will take to restore them.
- AED inspectionsInspections of automated external defibrillators, pads, batteries, cabinets and records, so every AED in your building is ready when someone needs it.
Wireless & communications systems
Enterprise WiFi, cabling, voice, AV and the data centre behind them.
- WiFi surveysOn-site WiFi surveys with AirMagnet Survey Pro heat maps that show where coverage, capacity and interference fall short, and what to change.
- WiFi design and buildEnterprise WiFi designed around your users and building, then installed, configured and verified with a post-installation survey.
- Point-to-point (long range) wirelessWireless links that connect buildings, yards and remote sites where running fibre or copper is impractical, from path study to aligned and tested link.
- Structured cabling design and buildCopper and fibre cabling designed to ANSI/TIA-568 practice, installed, labelled, tested and documented so your network has a reliable base.
- Data centre design and buildServer rooms and small data centres planned around power, cooling, cabling and access, then built and handed over with full documentation.
- VoIP design and buildBusiness phone systems that run over your data network, designed for clear calls, set up with the right network settings and tested before go-live.
- AV systemsBoardroom, meeting room and presentation AV designed around how rooms are used, then installed, tuned and handed over so people can use it.
- Crestron control systemsCrestron control for meeting rooms and buildings, designed so AV, lighting, shades and climate respond from one simple interface.
- Digital signageDigital signage networks planned from the message out: displays, players, content management, mounting and network, installed and ready to use.
Maintenance & inspections
Independent inspections of a building's structure and condition, with a written record of what to fix first.
- Commercial building inspectionsIndependent inspections of commercial buildings covering structure, envelope, mechanical, electrical and life safety systems, with a clear written report.
- Home inspectionsHome inspections where you walk the property with the inspector, hear the findings on the day and get a written report within two days.
- Certificate of occupancy inspectionsPre-occupancy inspections that find deficiencies before the authority's final inspection, so your building is ready to be occupied on schedule.
- Roof inspectionsRoof inspections for flat and sloped roofs that find leaks, drainage problems, ventilation issues and wear before they turn into interior damage.
- Concrete inspections and X-rayConcrete condition inspections and scanning before cutting or coring, so you understand cracks and deterioration and avoid hitting rebar, tendons or conduit.
- Welding inspectionsIndependent inspections of welds on structural steel, supports and fabricated parts, checked against drawings, procedures and the applicable standard.
Safety programs
Written programs, reviews and training for the highest-risk work on a site.
- Safety program development and reviewHow ehZee builds new health and safety programs and reviews existing ones so they match the work you do and the rules in your province.
- Confined space programsHow ehZee helps employers identify confined spaces, assess their hazards and build entry, permit and rescue procedures that meet provincial rules.
- H2S Alive trainingHow ehZee helps employers plan H2S Alive training for their crews and build hydrogen sulphide hazards into a working safety program.
- Lift safety and fall arrestHow ehZee reviews fall protection plans, anchors, fall arrest equipment and lifting practices, and helps employers write plans workers can follow.